210-Watt, 6-1/2" Two-Way Component System

Product Actions

Cet article n’est actuellement pas disponible.

N° d’article GTO608C

Caractéristiques Générales

Size 6-1/2
Type Two-Way
Series Grand Touring

Audio Specifications

Frequency Response 50Hz–21kHz
Power Handling (RMS) 70W
Power Handling (Peak) 210W
Sensitivity (2.83V@1m) 92dB
Nominal Impedance 2 ohms

Speaker Specifications

Low-Frequency Transducer PlusOne® HCL™ honeycomb-laiminate cone
Controls/Adjustments HF cut: 0dB/-6dB
Crossover Frequencies Outboard
High-Frequency Transducer 25mm (1") edge-driven My-Ti™ dome, pivoting


Mounting Depth Woofer (in) 2-1/16
External Diameter Woofer (mm) 159
External Diameter Woofer (in) 6-1/4
Mounting Cutout Diameter Woofer (mm) 133
External Diameter Tweeter (in) 2
Mounting Depth Woofer (mm) 52
Mounting Cutout Diameter Woofer (in) 5-1/4
Mounting Cutout Diameter Tweeter (mm) 47
Mounting Cutout Diameter Tweeter (in) 1-7/8
External Diameter Tweeter (mm) 51
Mounting Depth Tweeter (in) 11/16
Mounting Depth Tweeter (mm) 17
  • (2) GTO608C Midwoofers
  • (2) Tweeter brackets
  • (2) Caps screws for tweeter brackets
  • (2) Additional alternate tweeter encasements
  • (2) Additional alternate tweeter brackets
  • (2) Additional alternante bracket cap
  • (1) Owner's Manual
  • (2) Grilles, (2) mounting bracket for woofers, (2) buffer pieces for grille/mounting bracket
  • (2) Crossover units
  • (12) Screw clips
  • (2) Tweeters
  • (8) Small clip screws, (2) long clip screws
  • (34) Screws
  • (4) Sets of speaker wire
  • (2) Tweeter encasements

Manuels & Télécharger

Les derniers modes d’emploi, des guides de démarrage rapide et autres documents.

Search Result For ""

GTO608C est évalué 3.0 de 5 de 2.
Rated 4 de 5 de par Clean + low distortion I've had these in my car for 6 months now. They sound super clean and crisp. there's no need for the tweeter boost on the cross over. The only thing I don't like is the lack of lower mid range. I think that's due to my doors design though,, not the speaker.
Date de publication: 2014-07-03
Rated 2 de 5 de par Mediocre These components are about average and definitely leave a lot to be desired. Fs = 83Hz, no inductor in the crossover, almost too crisp highs. No low end bass, the factory speakers deliver better here. They do have punchy midbass which is an interesting combination with the stock front speakers. The ease of install is excellent as everything you need is included, but overall sound quality is just so-so. For the price $$ they are alright, but no way I would pay $$$ for them.
Date de publication: 2013-05-14
  • y_2019, m_4, d_23, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_fr_CH, sid_gto608c, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_jbl

do you have to install this in pairs or only which is blown out?

Posée par: Francisco
Please do not listen to Randy! Unless you are replacing the exact same speaker, you need to replace both, especially if you are replacing factory speakers. It will sound horrible with two different speakers for many reasons.
Répondue par: tony351
Date de publication: 2019-04-02

are these the best to remedy my 2007 Toyota Sequoia's front door speakers that are producing a rattling sound?  Would I need the whole system, or just two 6-1/2 inch speakers?

Posée par: ron reuss
Thank you for your question on the door speaker, looking at your car speaker guide you can opt out the tweeter and the crossover and just install the 6 1/2 speakers, for cost saving you can look at our GX 6 1/2 series and just get the speaker not the entire set
Répondue par: Randy at JBL
Date de publication: 2017-12-02

Hello, What is the woofer surround made from on the GTO608C and the other GTO series speakers?  Foam? Rubber? Cloth? Thanks, Ryan

Posée par: rcg13
Répondue par: tellme
Date de publication: 2017-12-02

JBL GTO608C. the JBL GTO608C works at 4 ohms or only 2 ohms in its box says 4 Ohms is marked well, but in its manual of its specifications only says 2 ohms does not mention 4 ohms help please.

Posée par: luis_rey
The JBL GTO608C has a nominal impedance of 2 ohms and it does not have a switch where you can choose between 2 ohms and 4 ohms so it would not work at 4 ohms.
Répondue par: Dan E
Date de publication: 2019-04-02
  • y_2019, m_4, d_23, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_fr_CH, sid_gto608c, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_jbl